Can you rescreen just one panel instead of the whole lanai?

Yes. Single lanai and pool-enclosure panels can be rescreened on their own. The handyman will look at the panel and the frame around it and tell you what the job needs before you approve the price.

Do I need a permit to rescreen in Kendall?

Small like-for-like repairs such as re-screening normally need no permit in Florida. Permit rules are set by the local building department and can vary, so confirm with them if your job goes beyond simple rescreening.

Why do screens and frames wear out so fast in Kendall?

Sun, heat and near-daily wet-season storms are hard on mesh, and humid air grows mildew on frames. Salty air from Biscayne Bay also corrodes metal hardware faster than in drier parts of the country. Ask the handyman to check the frame and hardware while they're there.

Should I book before hurricane season?

Demand here spikes ahead of and during hurricane season, which runs May through November. If you've spotted a torn panel, it makes sense to get your request in early. Call or send a request and the handyman will confirm the price with you first.

What if the aluminium frame of my pool enclosure is bent or damaged?

That is structural work for an enclosure contractor, not handyman work. A handyman can rescreen a panel in a sound frame, and will tell you plainly if the frame needs someone else.

A handyman for screen repair in Kendall, FL

Kendall is mostly 1960s–1990s concrete block and stucco homes, and a torn window or lanai screen on one of them is a small, fixable job. If you're reading this, a screen has almost certainly ripped, a panel has a hole in it, or a frame got bent. One Call Handyman Repairs is a referral and scheduling service. We connect you with a vetted, independent local handyman who does the work. We are not the contractor. Look for a handyman who comes to see the job, gives you the price before starting, and tells you plainly which part is screen work and which part is frame work.

Call now · (888) 471-8212

Phones answered around the clock · free estimate

A woman rolling new screen mesh into a lanai screen panel with a spline roller, a pool behind her.

It happens here for ordinary reasons. Kendall has a tropical climate with a wet season from May through October, with near-daily thunderstorms. Florida's intense sun and heat also fade and embrittle screen material over time. Falling fronds and storms tear panels every year. Humid air lets mildew grow on screen frames, and salty air from Biscayne Bay speeds up rust on metal hardware.

Before the handyman arrives

Don't count on a torn screen to keep a child or pet in. A screen is a bug barrier, not a safety barrier, and a damaged one gives way under a small push or paw.
Don't lean on or climb a damaged panel. Torn mesh and a loose frame won't hold your weight, and you could fall through or bend the frame further.
Don't try to straighten a bent pool-enclosure frame yourself. The aluminium frame of a pool enclosure is structural work, and that belongs to an enclosure contractor, not a handyman.
Don't patch a big tear with tape and leave it. Tape can hold for a short while, but wind and rain pull it loose and the hole usually gets bigger.

What the handyman does

The handyman looks at the job firstThey check the torn mesh, the frame and the spline groove, then give you the price. You approve it before any work starts, and the estimate is free.
Torn window and door screens are rescreenedThe old mesh comes out. New mesh and fresh spline go in, pulled tight so the screen sits flat.
Bent window screen frames are straightened or rebuiltIf the frame can be saved, it gets straightened. If it can't, the handyman rebuilds it so it fits the window again.
Single lanai and pool-enclosure panels are rescreenedOne damaged panel can be done on its own. The handyman works on the screen panel only, not the enclosure's structure.
You can choose the meshAsk about pet-resistant, no-see-um or solar mesh if you want it. The handyman will talk you through the choices.

In Kendall, FL

Kendall sits in the hurricane corridor, and the Atlantic season runs June 1 through November 30. Seasonal prep in Florida often includes inspecting screen enclosures, fences and gates. Demand here spikes ahead of and during hurricane season, with another bump in the dry winter months when seasonal residents return and tackle deferred maintenance. Kendall and the communities just south of it took the direct hit from Hurricane Andrew in 1992, and many local homes were rebuilt under tougher wind codes. A tight, well-fitted screen is a small part of getting a house ready for the season.

Housing here includes single-family homes, townhouses and mid-rise condos, especially near Dadeland and the Palmetto Expressway corridor. HOA-governed subdivisions are widespread, so if you live in one, check any rules on screen color or mesh before you choose. Whether you're in Kendale Lakes, The Hammocks, Devon-Aire or anywhere else around Kendall, the job is the same: new mesh, a tight fit, and a price you agree to first. Anything that touches the enclosure frame goes to an enclosure contractor.

Questions people ask

Can you rescreen just one panel instead of the whole lanai?: Yes. Single lanai and pool-enclosure panels can be rescreened on their own. The handyman will look at the panel and the frame around it and tell you what the job needs before you approve the price.
Do I need a permit to rescreen in Kendall?: Small like-for-like repairs such as re-screening normally need no permit in Florida. Permit rules are set by the local building department and can vary, so confirm with them if your job goes beyond simple rescreening.
Why do screens and frames wear out so fast in Kendall?: Sun, heat and near-daily wet-season storms are hard on mesh, and humid air grows mildew on frames. Salty air from Biscayne Bay also corrodes metal hardware faster than in drier parts of the country. Ask the handyman to check the frame and hardware while they're there.
Should I book before hurricane season?: Demand here spikes ahead of and during hurricane season, which runs May through November. If you've spotted a torn panel, it makes sense to get your request in early. Call or send a request and the handyman will confirm the price with you first.
What if the aluminium frame of my pool enclosure is bent or damaged?: That is structural work for an enclosure contractor, not handyman work. A handyman can rescreen a panel in a sound frame, and will tell you plainly if the frame needs someone else.

One call

One call to (888) 471-8212, or a request through the form on the website, gets you matched with an independent local handyman for your Kendall screen repair. The estimate is free, and the handyman gives you the price and gets your approval before any work starts.

Call now · (888) 471-8212

The same job in nearby cities

Every city we cover in Florida

Other jobs in this area

One Call Handyman Repairs arranges the visit; the handyman does the work and gives you the price.

Answers

Free tool

Paint calculator